2013.06.06 Thursday
チェンバロ製作日記
Making the bentside. The plank in the picture started out as a sright one. Little by little it is bent to the shape of the curved side of the case. I use a round iron plate heated by infrared lamps. Ruckers and Couchet used a fire to heat the plate, it's a miracle their workshop never burnt down.
Gluing the case walls together. There are little blocks glued to the case walls so that the clamps can push the joints together. These blocks will be cut off when the case is ready to be painted. For now they will be left on to protect the edges of the case.
Gluing the liners in. The liners are the supports for the soundboard. Once the liners are in place, the internal structure to make the case resist the tension of the strings can be finished. The next step will be to make the soundboard and then glue it in.
http://piparte.com/
Gluing the case walls together. There are little blocks glued to the case walls so that the clamps can push the joints together. These blocks will be cut off when the case is ready to be painted. For now they will be left on to protect the edges of the case.
Gluing the liners in. The liners are the supports for the soundboard. Once the liners are in place, the internal structure to make the case resist the tension of the strings can be finished. The next step will be to make the soundboard and then glue it in.
http://piparte.com/
| チェンバロ製作注文のあしあと | 19:02 | - | - |